Pump, bearing, door lock, solenoid valve and board faults in washing and drying machines.
Pump filter cleaning from 450 TRY
Most washing machine faults come from small parts: coins, clips and wires get into the pump filter, scale blocks the inlet valve, and vibration wears bearings. With the right diagnosis, most faults are fixed in the same visit.
The faults we meet most often
- Not draining: Pump filter or drain pump. Filter cleaning is 450-750 TRY, pump replacement 1,600-2,400 TRY.
- Not filling: A blocked inlet filter or solenoid valve fault.
- No spin or vibration: Shock absorber, belt, motor brushes or bearing. Bearing replacement costs 3,500-5,000 TRY and may require tub removal.
- Door will not lock: Door lock (switch) and wiring set.
- Error code / no display: Electronic board; mostly repairable.
Drying machines
In heat-pump and condenser dryers, filter blockage, dirty condensers, and heater and sensor faults are common. Cleaning the condenser once a year can cut energy use by up to 15%.
Prevention
Check pockets, clean the pump filter every three months, use the descaling programme and do not overload the machine. These three habits halve the fault rate.
Scope of service
- Pump, valve and bearing in stock
- Board repair in the workshop
- Dryer maintenance
- Fixed in the same visit
Washing and Drying Machine Service — get a quote
Fill in the form and we will get back to you as soon as possible.