Repair of circulation pump, heater, scale and sensor faults in dishwashers.
Diagnosis and cleaning from 850 TRY
When a dishwasher does not wash cleanly it is often not a fault but a scale and blockage problem. Because hard water is common in Bursa, scale build-up on the heating element and spray arms is frequent. Still, falling wash pressure or water not heating can point to a real part failure.
Symptoms and likely causes
- Dishes come out dirty: Blocked spray-arm holes, a dirty filter or a weak circulation pump.
- Not draining: Drain pump, discharge hose or trap connection.
- Not heating or drying: Heating element or NTC sensor. Element replacement ranges from 1,400 to 2,200 TRY.
- Door leaks: Door seal or hinge springs.
- Tablet will not dissolve: Low water temperature or a faulty tablet compartment mechanism.
What we do on a service visit
The filter, spray arm and drain line are cleaned and a descaling programme is run. Pump pressure and element resistance are measured. If there is a fault, parts are replaced with your approval. For built-in devices we aim to service without removing the cabinet.
Usage tips
Fill the salt and rinse-aid compartments regularly, set the salt according to water hardness, run an empty cycle with machine cleaner once a month and scrape food scraps off before they reach the filter.
Scope of service
- Descaling and cleaning included
- Built-in units without removing cabinets
- Heater and pump in stock
- Usage advice by water hardness
Dishwasher Service — get a quote
Fill in the form and we will get back to you as soon as possible.